Panasonic KX-TA624 Manual De Usuario

Descargar
Página de 214
3-52
Telephone Features
D
3.2
Telephone Features
Any Telephone
Enter the DISA 
phone number.
Ringback tone and 
one short beep
DISA phone no.
line acccess code
Enter a line access code 
(9 or 81 through 86).
phone no.
Enter the phone number 
of the external party.
In None Security Mode
In Trunk Security Mode
In All Security Mode
Enter the DISA 
phone number.
Ringback 
tone and 
one short 
beep
DISA 
phone no.
line acccess 
code
Enter a 
line access code 
(9 or 81 through 86).
DISA security 
code
Enter the 
pre-assigned 
DISA security 
code (4 digits).
One short 
beep
phone no.
Enter the 
phone number 
of the external 
party.
Dial    .
Dial tone 
from the 
Central 
Office
Dial tone from 
the Central Office
Enter the DISA 
phone number.
Ringback 
tone and 
one short 
beep
DISA 
phone no.
line acccess 
code
Enter a 
line access code 
(9 or 81 through 86).
DISA security 
code
Enter the 
pre-assigned 
DISA security 
code (4 digits).
One short 
beep
phone no.
Enter the 
phone number 
of the external 
party.
Dial    .
Dial tone 
from the 
Central 
Office
Calling an external party without an outgoing message
Conditions
• An optional OGM/FAX Detection card is necessary for outgoing messages.
• When an incoming call is not answered before the “DISA Ringing Time before
Intercept” (default: 20 seconds) expires, “Intercept Routing” starts or the call will be
disconnected.
• “Intercept Routing” starts after the “DISA Waiting Time after OGM” expires (default:
5 seconds), if nothing has been dialed. The call is disconnected when the “DISA
Ringing Time after Intercept” (default: 20 seconds) expires, or when there is no
destination for “Intercept Routing”.
• This system supports up to ten programmable DISA built-in auto attendant (AA)
numbers. Each number must be one digit. You can access an extension or a ring group
by entering a 1-digit AA number.
• You can store up to four programmable DISA security codes. These codes must have
four digits, and they must be different.
• When the “Outside-to Outside (CO-to-CO) Line Duration Time Limit” expires, both
lines are disconnected unless the caller re-tries or extends the time (default: 10 min.), if
available. A warning tone is sent to both parties fifteen seconds before the time limit.
• If you dial the wrong DISA security code, three beeps will be heard. The call will be
disconnected after three failed attempts. If you enter the security code a second and
third time, you do not need to dial 
.