Panasonic KX-TD500 Manual De Usuario
General Features
220
Features Guide
Station Hunting
Description
If a called extension is busy, Station Hunting redirects the incoming call to an idle extension
within the same Extension Group / Incoming Group.
Idle extensions are automatically searched for according to the pre-determined hunting type.
within the same Extension Group / Incoming Group.
Idle extensions are automatically searched for according to the pre-determined hunting type.
Extension Group
Station Hunting Group can be made up by assigning the group type of an Extension Group as
"Circular" or "Terminate." Up to 128 Station Hunting Groups, each consisting of more than
one extension in the same tenant, can be created in the system.
"Circular" or "Terminate." Up to 128 Station Hunting Groups, each consisting of more than
one extension in the same tenant, can be created in the system.
Incoming Group
Station Hunting Group can be made up by assigning the group type of an Incoming Group as
"Terminate." Up to 96 Station Hunting Groups can be created in the system.
"Terminate." Up to 96 Station Hunting Groups can be created in the system.
Conditions
•
What if all extensions in the group are busy?
If all of the searched extensions are busy, the system redirects the call to the overflow
destination assigned by System Programming <Section 3.3 Extension Group / 3.5
Incoming Group, "[Overflow Setting] Destination – Day / Night" in the Programming
Guide>.
If all of the searched extensions are busy, the system redirects the call to the overflow
destination assigned by System Programming <Section 3.3 Extension Group / 3.5
Incoming Group, "[Overflow Setting] Destination – Day / Night" in the Programming
Guide>.
•
FWD / DND Mode
If the called extension is in Call Forwarding or Do Not Disturb mode, Station Hunting
skips the extension by default. This can be changed by System Programming <Section
3.3 Extension Group / 3.5 Incoming Group, "FWD / DND Mode" in the Programming
Guide>.
If the called extension is in Call Forwarding or Do Not Disturb mode, Station Hunting
skips the extension by default. This can be changed by System Programming <Section
3.3 Extension Group / 3.5 Incoming Group, "FWD / DND Mode" in the Programming
Guide>.
•
To leave the hunting group temporarily, use the Log-Out function.
To re-join, use the Log-In function.
To re-join, use the Log-In function.
Hunting Type
Description
Circular
The extensions are searched in the order of the extension port
physical numbers (Installing additional cards may change the
order.) in a circular way, until an idle one is found.
physical numbers (Installing additional cards may change the
order.) in a circular way, until an idle one is found.
Terminate
The extensions are searched in the order of the extension port
physical numbers (Installing additional cards may change the
order.) in a linear way, until an idle one is found, or the
extension with the highest physical number in the group is
reached.
physical numbers (Installing additional cards may change the
order.) in a linear way, until an idle one is found, or the
extension with the highest physical number in the group is
reached.
Hunting Type
Description
Terminate
The idle extension is searched in the order assigned in the
Incoming Group, always starting at the first assigned extension.
Incoming Group, always starting at the first assigned extension.