Panasonic KX-TD500 Manual De Usuario
General Features
Features Guide
261
Intercept Routing
Description
Provides automatic redirection of incoming CO calls. There are the following two types of
Intercept Routing:
Intercept Routing:
Rerouting
Activated when an incoming CO call cannot be placed on the destination extension.
Activated when an incoming CO call cannot be placed on the destination extension.
Intercept Routing-No Answer (IRNA)
Activated when an incoming CO call is not answered within a specified period of time
(Intercept time).
Activated when an incoming CO call is not answered within a specified period of time
(Intercept time).
Conditions
•
Intercept Routing applies to:
DIL, DISA, TAFAS, DID, DID (ISDN), TIE
DIL, DISA, TAFAS, DID, DID (ISDN), TIE
*1
, Call Forwarding, and Station Hunting.
•
IRNA destinations
The final destination of intercepted calls can be programmed for day and night modes
individually.
There are seven possible destinations:
1) an extension
2) an external pager
3) a DISA outgoing message
4) an Extension Group
5) an Incoming Group (except DIL 1:N Group)
6) a phantom extension
7) an ISDN extension (except the wild card character "X")
The final destination of intercepted calls can be programmed for day and night modes
individually.
There are seven possible destinations:
1) an extension
2) an external pager
3) a DISA outgoing message
4) an Extension Group
5) an Incoming Group (except DIL 1:N Group)
6) a phantom extension
7) an ISDN extension (except the wild card character "X")
•
Do Not Disturb
Even if the destination is in Do Not Disturb mode, it does not function and the call re-
directed by Intercept Routing is placed there.
Even if the destination is in Do Not Disturb mode, it does not function and the call re-
directed by Intercept Routing is placed there.
•
IRNA destinations can be assigned either on an Extension Line basis or on a Trunk Group
basis.
basis.
•
If an outside call (DIL 1:N, TAFAS, etc.) is not directed to individual extension, the call is
redirected to the intercept destination assigned on a Trunk Group basis, not on an Extension
Line basis.
redirected to the intercept destination assigned on a Trunk Group basis, not on an Extension
Line basis.
•
If Intercept destination is not programmed on an Extension Line basis, the call is redirected
to the Intercept destination assigned on a Trunk Group basis.
to the Intercept destination assigned on a Trunk Group basis.
•
If an outside call is routed to a Call Forwarding destination by Call Forwarding feature and
then not answered within a specified period of time, the system redirects the call to the
IRNA destination assigned by the Call Forwarding destination.
then not answered within a specified period of time, the system redirects the call to the
IRNA destination assigned by the Call Forwarding destination.
•
When an outside call directed to an ISDN extension is not answered within a specified
period of time, the call is redirected to an extension assigned on a Trunk Group basis.
period of time, the call is redirected to an extension assigned on a Trunk Group basis.
*1
Before utilizing this feature, "IRNA for TIE Line" should be enabled by System Programming.