Panasonic KX-TD500 Manual De Usuario
General Features
Features Guide
275
External Feature Access
Description
Allows the extension user to have access to the features of a host PBX, Centrex or Central
Office, such as Call Waiting, etc. This is performed by putting the current party on hold and
sending a flash signal to the other end during an outside call.
Office, such as Call Waiting, etc. This is performed by putting the current party on hold and
sending a flash signal to the other end during an outside call.
Conditions
•
FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting
the current call.
This is determined by System Programming <Section 2.8 System Option, "3. FLASH
button operation while CO talking" and "4. FLASH button operation when "Don't release
the trunk" is selected at #3" in the Programming Guide>.
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting
the current call.
This is determined by System Programming <Section 2.8 System Option, "3. FLASH
button operation while CO talking" and "4. FLASH button operation when "Don't release
the trunk" is selected at #3" in the Programming Guide>.
•
Flash Time
The flash time must be assigned as required by the Centrex, host PBX or CO line.
The flash time must be assigned as required by the Centrex, host PBX or CO line.
•
Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or
One-Touch Dialing works as External Feature Access, not as Flash (Disconnect Signal)
used to disconnect the calls.
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or
One-Touch Dialing works as External Feature Access, not as Flash (Disconnect Signal)
used to disconnect the calls.
•
<PT>
FLASH button or the feature number is used to perform this feature.
FLASH button or the feature number is used to perform this feature.
•
<SLT>
Feature number is used to perform this feature. This feature does not function, if an SLT
has a call on Consultation Hold.
Feature number is used to perform this feature. This feature does not function, if an SLT
has a call on Consultation Hold.
Programming Guide References
•
2.3 Numbering Plan
–
External Feature Access
•
2.8 System Option
–
FLASH button operation while CO talking
–
FLASH button operation when "Don't release the trunk" is selected at #3
•
3.2 Trunk Group
– Flash Time
– Max. Dial No. after EFA Signal
– Max. Dial No. after EFA Signal
Features Guide References
•
•