Panasonic KX-TD500 Manual De Usuario
General Features
82
Features Guide
Paralleled Telephone
Description
Any PT can be connected in parallel with an SLT.
The following two combinations of telephones are available:
The following two combinations of telephones are available:
a)
APT + SLT (an Analog Proprietary Telephone and a Single Line Telephone / a single
extension port)
extension port)
b)
DPT + SLT (a Digital Proprietary Telephone and a Single Line Telephone / a single
extension port)
extension port)
When a parallel connection is made, an extension user can make and answer a call using either
one of two telephones.
one of two telephones.
Conditions
•
Hardware Requirements
DHLC card (KX-TD50170) or HLC card (KX-T96170) is required to utilize this feature.
DHLC card (KX-TD50170) or HLC card (KX-T96170) is required to utilize this feature.
•
To enable Paralleled Telephone mode, set "Parallel / XDP" to "Parallel" in the Extension
Port Assignment screen <Section "1.4 Extension Port Assignment" in the Programming
Guide>.
Port Assignment screen <Section "1.4 Extension Port Assignment" in the Programming
Guide>.
•
The corresponding PT user can activate or deactivate the paralleled SLT ringing by dialing
the feature number for "Parallel telephone mode."
the feature number for "Parallel telephone mode."
•
Paralleled Telephones (APT+SLT / DPT+SLT) share the same extension number.
•
Extra Device Port (XDP)
If EXtra Device Port feature (DPT+SLT) is activated, each telephone has its own unique
extension number and acts as completely different extensions.
If EXtra Device Port feature (DPT+SLT) is activated, each telephone has its own unique
extension number and acts as completely different extensions.
•
The PT can be used to perform normal operations whether or not the SLT is enabled.
•
In the DPT + SLT combination, if one telephone goes off-hook while the other telephone
is on a call, the call is switched to the former.
is on a call, the call is switched to the former.
•
In the APT + SLT combination, if one telephone goes off-hook while the other telephone
is on a call, a 3-party call is established. If one user goes on-hook, the other user continues
the call.
is on a call, a 3-party call is established. If one user goes on-hook, the other user continues
the call.
•
When receiving a call;
The SLT is activated; Both the PT and the SLT will ring except when the PT is in Hands-
free Answerback mode or Voice Alerting mode.
The SLT is deactivated; PT rings but the SLT does not ring.
The SLT is activated; Both the PT and the SLT will ring except when the PT is in Hands-
free Answerback mode or Voice Alerting mode.
The SLT is deactivated; PT rings but the SLT does not ring.
•
When the SLT is in operation, the display and LED indicator on the paired PT will work in
the same way as if the PT is in operation.
the same way as if the PT is in operation.
•
If APT + SLT are used, the extension user cannot originate a call from the SLT if the APT
is:
is:
— playing BGM
— in programming mode
— receiving a paging announcement over the built-in speaker