Panasonic KX-TG2130 Manual De Usuario
Answering System
20
For assistance, please visit http://www.panasonic.com/help
Answering system
Important:
L
Only 1 person can access the answering
system at a time.
system at a time.
L
When callers leave messages, the unit
records the day and time of each
message. Make sure the day and time
have been set (page 12).
records the day and time of each
message. Make sure the day and time
have been set (page 12).
L
You cannot operate the answering
system during a phone call.
system during a phone call.
L
While a caller message is being
recorded, “
recorded, “
” and the number of
recorded messages are alternately
displayed on the base unit.
displayed on the base unit.
Memory capacity
The total recording capacity (including
your greeting message, voice memos, and
caller messages) is about 15 minutes.
A maximum of 59 messages (including
voice memos) can be recorded.
your greeting message, voice memos, and
caller messages) is about 15 minutes.
A maximum of 59 messages (including
voice memos) can be recorded.
L
If the message memory becomes full:
– “ ” and the number of recorded
– “ ” and the number of recorded
messages are alternately displayed
while the answering system is turned
on.
while the answering system is turned
on.
– the unit announces “Memory is full”
after the phone rings 10 times.
To record additional messages, erase
unnecessary messages (page 21).
unnecessary messages (page 21).
L
Messages are retained even if a power
failure occurs.
failure occurs.
Turning the answering system
on/off
on/off
Press {ANSWER ON} to turn on/off the
answering system.
answering system.
L
When the answering system is turned
on, the display shows the number of
recorded messages.
on, the display shows the number of
recorded messages.
L
When the answering system is turned
off, the display shows “
off, the display shows “
”.
Screening calls
While a caller is leaving a message, you
can screen the call through the base unit’s
speaker.
To adjust the speaker volume, press {<}
or {>} repeatedly.
can screen the call through the base unit’s
speaker.
To adjust the speaker volume, press {<}
or {>} repeatedly.
You can also screen the call through the
handset by pressing {ANSWER}. Press
{
handset by pressing {ANSWER}. Press
{
ANSWER} again to turn off call screening
from the handset.
To adjust the receiver volume, press VOL.
{V}
To adjust the receiver volume, press VOL.
{V}
or {^} repeatedly.
You can answer the call by pressing {C}
on the handset.
on the handset.
Recording your greeting
message
message
You can record your own greeting
message (max. 2 minutes) that is played
when the answering system answers a
call. If you do not record a greeting
message, a prerecorded greeting
message is used.
message (max. 2 minutes) that is played
when the answering system answers a
call. If you do not record a greeting
message, a prerecorded greeting
message is used.
1
Press and hold {GREETING} until
recording is finished.
recording is finished.
2
After the base unit beeps, speak clearly
about 20 cm (8 inches) away from the
MIC.
about 20 cm (8 inches) away from the
MIC.
L
The message must be more than 3
seconds long to be recorded.
seconds long to be recorded.
Base unit
Base unit
TG2130.book 20 ページ ２００６年１１月３０日 木曜日 午後６時２５分