Panasonic kx-tcd961 Manual De Usuario

Descargar
Página de 68
21
Chapter 1
Preparation
Selecting the Caller’s Recording Time
You can select “1 minute”, “unlimited” or “greeting only” for the caller’s recording time. The factory
preset is “unlimited”.
If you select “greeting only”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
1
Press 
then 
.
2
Press 
.
” is displayed on the handset.
“P” is displayed on the base unit.
3
Press 
.
The current setting is displayed on the
base unit.
1: 1 minute    2: unlimited    
3: greeting only
4
Press 
or 
to select the
recording time.
The setting is displayed.
3
2
1
3
INT
PROG
5
Press 
.
If you select “greeting only”, “
--” is
displayed on the base unit.
PROG
Selecting the Number of Rings
You can select the number of times the unit rings before the answering system answers a call, from 2
to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.
1
Press 
then 
.
2
Press 
.
” is displayed on the handset.
“P” is displayed on the base unit.
3
Press 
.
The current setting is displayed on the
base unit.
4
Press dialling button 
to 
to
set the number of rings.
0:  Selects “AUTO”. “A” is displayed.
2-7: The unit will answer after the selected
number of rings.
7
2
0
2
INT
PROG
5
Press 
.
PROG
*Toll Saver 
(When set to “AUTO”)
When you call the unit from a touch tone
telephone:
If the unit answers on the 2nd ring, there is at
least one new message.
If the unit answers on the 5th ring, there are 
no new messages.
Hang up when you hear the 3rd ring. This
will save you the toll charge for the call.
KX-TCD961EB.1(2~22)  99.9.27 7:37 PM  Page 21