Panasonic kx-tcd961 Manual De Usuario
Chapter 2
Cordless T
elephone (Basic Operations)
25
Storing Phone Numbers in Memory
You can store up to 20 telephone numbers in the handset.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
Dialling a Stored Number
1
Press
G or F until a desired memory
station number (
to
) is displayed.
•
You can enter the desired memory station
number after pressing
number after pressing
G or F.
2
Press
.
3
Enter a phone number, up to 24 digits.
•
If you misdial, press
. Digits are
erased from the right. To erase all digits,
press
press
firmly.
4
Press
.
•
A confirmation tone sounds and the display
will return to the stand-by mode.
will return to the stand-by mode.
•
To store other numbers, repeat steps 1
through 4.
through 4.
PROG
C
C
PROG
1
Press
G or F until the desired phone
number is displayed.
•
You can enter the desired memory station
number (
number (
to
) after pressing
G or F.
•
To exit the speed dialler memory, press
.
2
Press
.
•
The number is automatically dialled.
C
Speed Dialling
To erase a stored number
1
Press
G or F until the desired phone
number is displayed.
•
You can also enter the desired memory
station number (
station number (
to
) after pressing
G or F.
2
Press
.
3
Press
.
4
Press
.
PROG
C
PROG
•
If a pause is required for dialling, press
where needed. Pressing
counts as one digit (p. 27).
•
To cancel during programming, press
, then start from step 1.
•
If your line has rotary or pulse service, any
access numbers stored after pressing
access numbers stored after pressing
will
not be dialled.
PROG
RDL
RDL
00-3334444
Memory card
Use the memory card on page 63 as a name or
phone number index for speed dialling.
Cut out the card and attach it in a convenient
place.
phone number index for speed dialling.
Cut out the card and attach it in a convenient
place.
00-
KX-TCD961EB.2(23~29) 99.9.27 7:35 PM Page 25