Panasonic kx-tcd961 Manual De Usuario
Chapter 3
Cordless T
elephone (Advanced Operations)
1
Press
then
.
2
Press
.
3
Enter the current handset password.
•
The factory preset is 0000.
4
Enter the new 4-digit password TWICE.
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
5
INT
PROG
31
You can program a 4-digit password for both the handset and base unit individually. Each factory
preset is 0000. Changing the password may prevent the unauthorised use of your unit by another
person.
preset is 0000. Changing the password may prevent the unauthorised use of your unit by another
person.
On the base unit
You need to enter the password when using the
functions such as “Setting the dialling mode”
(p. 15), “Setting the pause timing” (p. 27),
“Setting the earth/time break recall mode”
(p. 29), “Setting the call restriction” (p. 34),
“Clearing the settings of the base unit memory”
(p. 37), “Registering a handset in the base unit”
(p. 48), “Cancelling a handset” (p. 50) and
“Setting the bell selection” (p. 51).
functions such as “Setting the dialling mode”
(p. 15), “Setting the pause timing” (p. 27),
“Setting the earth/time break recall mode”
(p. 29), “Setting the call restriction” (p. 34),
“Clearing the settings of the base unit memory”
(p. 37), “Registering a handset in the base unit”
(p. 48), “Cancelling a handset” (p. 50) and
“Setting the bell selection” (p. 51).
Once you have programmed the password, you cannot confirm it. We recommend you write down
the password. If you forget it, please consult your nearest Panasonic Service Centre.
the password. If you forget it, please consult your nearest Panasonic Service Centre.
•
If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
password is incorrect. Enter the correct
password.
Setting the Password
On the handset
You need to enter the password when using the
functions such as “Setting the call prohibition”
(p. 33), “Clearing the settings in handset
memory” (p. 37) and “Cancelling a base unit”
(p. 50).
functions such as “Setting the call prohibition”
(p. 33), “Clearing the settings in handset
memory” (p. 37) and “Cancelling a base unit”
(p. 50).
1
Press
.
2
Press
G or F until “F5 ” is displayed,
then press
.
3
Enter the current handset password.
•
The factory preset is 0000.
4
Enter the new 4-digit password TWICE.
•
If you misdial, press
. Digits are
erased from the right.
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
C
OK
PROG
F5
o
- - - -
F5
o
- - - -
o
- - - -
5
o
- - - -
5
o
- - - -
o
- - - -
KX-TCD961EB.3(30~37) 99.9.27 7:34 PM Page 31