Panasonic KX-TDE100 Manual De Usuario
3.8 Connection of Extensions
146
Installation Manual
3.8.3
Digital EXtra Device Port (Digital XDP) Connection
A DPT can be connected to another DPT on the Digital XDP connection. In addition, if the DPT is connected
to a DHLC8 card, it can also have an SLT connected in Parallel mode or XDP mode.
to a DHLC8 card, it can also have an SLT connected in Parallel mode or XDP mode.
Notes
•
Both DPTs must be KX-T7600 series DPTs (except KX-T7640). Note that the KX-T7667 can only
be connected as a slave DPT.
be connected as a slave DPT.
•
Parallel mode or XDP mode can be selected through system programming.
•
If XDP mode is enabled through system programming, parallel connection is not possible. Refer to "1.11.9 Paralleled Telephone" and "2.1.1 Extension Port Configuration" in the Feature Guide for further information.
With KX-T7600 Series DPT (except KX-T7600E Series)
Using a Modular T-Adaptor
To DLC8/DLC16 card
To DHLC8 card
(for connection of SLT)
(for connection of SLT)
4-conductor wiring cord
Connect pins "D1" and "D2".
Connect pins "D1" and "D2".
Slave DPT
SLT
Master DPT
Modular
T-Adaptor
T-Adaptor
4-conductor wiring cord
Connect pins "D1" and
"D2".
Connect pins "D1" and
"D2".
2-conductor wiring cord
Connect pins "T" and "R".
Connect pins "T" and "R".
Slave DPT
Master DPT
TO MAIN UNIT
/ PABX
TO TEL
TO MAIN UNIT
/ PABX
/ PABX
Cable
Maximum Distance
ø 0.4 mm:
30 m
ø 0.5 mm:
50 m
ø 0.6 mm:
60 m
CAT 5:
50 m
Back View of DPTs
To DLC8/DLC16 card
To DHLC8 card
(for connection of SLT)
(for connection of SLT)