Panasonic KX-TDA600 Manual De Usuario
Location of Controls
5
TALK/SP-PHONE (Speakerphone) Key:
Used to make or answer calls, or
toggle between the two conversation
modes (Receiver/Hands-free*) during
a conversation.
* You can talk with the other party
alternately through the speaker in a
quiet room.
Used to make or answer calls, or
toggle between the two conversation
modes (Receiver/Hands-free*) during
a conversation.
* You can talk with the other party
alternately through the speaker in a
quiet room.
HOLD Key:
Used to place a call on Hold.
Used to place a call on Hold.
Meeting Mode Key:
Used to turn Meeting Mode on or off
when pressed for more than two
seconds in standby mode.
Used to turn Meeting Mode on or off
when pressed for more than two
seconds in standby mode.
RECALL/FLASH Key:
Used to disconnect the current call
and make another call without hanging
up, or answer a Call Waiting from the
telephone company.
Used to disconnect the current call
and make another call without hanging
up, or answer a Call Waiting from the
telephone company.
Left/Right Soft Key:
Used to select the function displayed
directly above each key. Functions
displayed depend on the state of use.
Used to select the function displayed
directly above each key. Functions
displayed depend on the state of use.
POWER/CANCEL Key:
Used to end calls, exit the Phonebook
or Function mode, or turn the handset
on or off.
Used to end calls, exit the Phonebook
or Function mode, or turn the handset
on or off.
Joystick:
Used to adjust the ringer/receiver
volume, select the Function menus
and the function displayed directly
above it, and move the cursor to select
a desired item.
Used to adjust the ringer/receiver
volume, select the Function menus
and the function displayed directly
above it, and move the cursor to select
a desired item.
TRANSFER/CLEAR Key:
Used to transfer a call to another party,
or clear digits or characters.
Used to transfer a call to another party,
or clear digits or characters.
INTERCOM Key:
Used to make or answer intercom calls.
Used to make or answer intercom calls.
Key Lock
You can lock all keys other than the
Joystick while the handset is in standby
mode.
You can lock all keys other than the
Joystick while the handset is in standby
mode.
Meeting Mode
You can set the handset to prevent
incoming calls from ringing. This can be
useful in situations where you do not
want to be disturbed, for example during
a meeting.
You can set the handset to prevent
incoming calls from ringing. This can be
useful in situations where you do not
want to be disturbed, for example during
a meeting.
1
2
3
4
5
6
7
8
9
Locked
Unlocked
Press the Joystick
for more than
2 seconds to
lock/unlock.
for more than
2 seconds to
lock/unlock.
<Displayed Icon>
Function
Status
Microphone volume
Low battery alarm
Key tone
Ringer/Voice Call/Paging/LCS
Ring On Charger
Auto Answer
Up
Off
Off
Off
Off
Off
Vibrate
On
• During Meeting Mode, functions are:
• During Meeting Mode or when Vibrate
is set to Vib.& Ring or Vib. Ring,
while the handset is on charger:
while the handset is on charger:
* Please note that, if you set the handset
on the charger while receiving an
incoming call, vibration will stop. Once the
vibration stops, the handset will not
vibrate again for that call, even if the
handset is lifted up again. (If Quick
Answer is set, lifting up the handset will
answer the call.)
incoming call, vibration will stop. Once the
vibration stops, the handset will not
vibrate again for that call, even if the
handset is lifted up again. (If Quick
Answer is set, lifting up the handset will
answer the call.)
Function
Status
Vibrate*
Ringer
Off
User Setting
• During Meeting Mode, you cannot set
the Auto Answer feature.