Panasonic KX-TG6071 Manual De Usuario

For assistance, please visit http://www.panasonic.com/help

45

I cannot set the alarm.

L

In order to set the alarm, you must first set the date 
and time (page 14).

L

The handset has lost communication with the base 
unit. Move closer to the base unit, and try again.

While programming, the 
handset starts to ring.

L

A call is being received. Answer the call and start 
again after hanging up.

I fully charged the 
battery, but 7 
continues to flash, or 
8

 is displayed.

L

Clean the charge contacts and charge again (page 
11).

L

The battery may need to be replaced with a new one 
(page 10).

The handset display is 
blank.

L

Confirm that the battery is properly installed.

L

Fully charge the battery (page 10).

While charging, the 
charge indicator does 
not light and “Charge 
for 7h

” is displayed.

L

The battery is empty. The charge indicator does not 
light in order to concentrate on charging. After about 5 
minutes, the charge indicator lights and “Charging” 
is displayed.

Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.

L

Move the handset and base unit away from other 
electrical appliances.

L

Move closer to the base unit.

L

Turn on the clarity booster feature (page 18).

L

If your unit is connected to a telephone line with DSL 
service, we recommend connecting a noise filter 
between the base unit and the telephone line jack. 
Contact your DSL provider for details.

The handset and base 
unit do not ring.

L

The ringer volume is turned off. Adjust it (page 16, 
28).

I cannot make a call.

L

The dialing mode may be set incorrectly. Change the 
setting (page 14).

L

The base unit or another handset is in use. Try again 
later.

I cannot have a 
conversation using the 
headset.

L

Make sure that an optional headset is connected 
properly (page 42).

L

If “SP-phone” is displayed on the handset, press 
{C}

 to switch to the headset.

TG607X.book  Page 45  Friday, December 22, 2006  2:47 PM