Panasonic KX-TGP500 Manual De Usuario
Do Not Disturb
Description
Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
•
Yes
•
No
Default Value
No
3.7.3.4 Call Forward
Unconditional (Enable Call Forward)
Description
Selects whether to forward all incoming calls to a specified destination.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (
settings from the Web user interface (
® see [Synchronize Do
Not Disturb and Call Forward] in 3.7.3.1 Call Control) or
through configuration file programming (
through configuration file programming (
® see
"SYNCHRONIZATION_ENABLE_[1–8]" in 4.7.1 Call Control
Settings).
Settings).
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
•
Yes
•
No
Default Value
No
108
Administrator Guide
Document Version 2010.03.15
3.7.3 Call Control [Line 1]–[Line 8]