Panasonic KX-TGP500 Manual De Usuario

Specifies the IP address of the secondary DNS server.

•

This setting is available only when [Connection Mode] is set
to [Static].

Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)

Not stored.

This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings.

•

When you change the settings on this screen and click [Save], after the message "Complete" has been
displayed, the base unit will restart automatically with the new settings applied. If a unit is on a call
when "Complete" has been displayed, the base unit will restart after the unit returns to idle.

•

Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings (

® see

® see 2.1.4  IP Reset) through phone user

interface programming.

Selects the connection mode (link speed and duplex mode) of the LAN
port.

Document Version    2010.03.15

Administrator Guide

65