Panasonic KX-TGP500 Manual De Usuario
Value Range
•
Outband
•
Inband
Note
•
If you select [Outband], DTMF tones will be sent through SDP
(Session Description Protocol), compliant with RFC 2833. If you
select [Inband], DTMF tones will be encoded in the RTP
stream.
(Session Description Protocol), compliant with RFC 2833. If you
select [Inband], DTMF tones will be encoded in the RTP
stream.
Default Value
Outband
Configuration File Reference
Telephone-event Payload Type
Description
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[Outband].
[Outband].
Value Range
96–127
Default Value
101
Configuration File Reference
3.6.4.5 Call Hold
Supports RFC 2543 (c=0.0.0.0)
Description
Selects whether to enable the RFC 2543 Call Hold feature on this line.
Value Range
•
Yes
•
No
Note
•
If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Default Value
Yes
Configuration File Reference
3.6.4.6 CODEC Settings
First CODEC
Description
Selects which codec to assign the highest priority to.
Document Version 2010.03.15
Administrator Guide
95
3.6.4 VoIP Settings [Line 1]–[Line 8]