Panasonic nv-hv22gn Manual De Usuario
8
Option Setting
1 Press [MENU]
(9) to display the Main menu on the TV
screen.
2 Press [
43] (28) to select [OPTION] then press
[ENTER]
(26).
3 Press [
43] (28) to select the desired field.
TAPE SELECT:
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
cassette tape length to display the
approximate remaining tape time.
• Press [
2 1] (28) to select the corresponding video
cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
• Press [
2 1] (28) to select [AUTO]. Allows NTSC [4.43]
or [3.58] signals to be distinguished automatically.
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43:
When recording NTSC 4.43 signals.
3.58:
When recording NTSC 3.58 signals.
• Some programmes on NTSC 3.58 system cannot be
recorded correctly by selecting [3.58].
NTSC PB SELECT:
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
the TV used to play back a tape
recording NTSC signals.
• Press [
2 1] (28) to select the desired position according
to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58:
For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR:
To set the conditions for the Jet
Navigator Function.
Navigator Function.
• Press [
2 1] (28) to select [ON] or [OFF].
OFF:
Initially set at this position.
ON:
Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
[OSD REC] is set to [OFF] automatically.
DELETE NAVIDATA:
To delete all the Jet Navigator data
stored in the VCR memory.
stored in the VCR memory.
• Press [
2 1] (28) to select [ENTER] then press [ENTER]
(26) to do the deletion.
NO:
Initially set at this position.
ENTER: It is done to delete all the Jet Navigator data.
OSD REC:
To set the conditions for the OSD
Recording function.
Recording function.
• Press [
2 1] (28) to select [ON] or [OFF].
OFF:
Initially set at this position.
ON:
This setting enables OSD Recording. (See page
10.) If you select [ON], [JET NAVIGATOR] is set
to [OFF] automatically.
10.) If you select [ON], [JET NAVIGATOR] is set
to [OFF] automatically.
OSD:
To select the On Screen Display
mode.
mode.
• Press [
2 1] (28) to select [AUTO] or [OFF].
AUTO: To make various indicators appear On Screen
Display for 5 seconds press [STATUS/ NAVI CHECK]
(32).
OFF:
No indications appear.
4 Press [MENU]
(9) twice to exit the On Screen Display.
MENU
SELECT
END
END
: , ENTER
:MENU
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0
PROG.
END :MENU
TAPE SELECT
[
AUTO]
NTSC INPUT SELECT
[
AUTO]
NTSC PB SELECT
[
onPALTV]
JET NAVIGATOR
[
OFF]
DELETE NAVIDATA
[
NO]
OSD REC
[
OFF]
OSD
[
AUTO]
SELECT:
OPTION
LSQT0879.book 8 ページ ２００５年２月２３日 水曜日 午後８時４９分