Panasonic proline lq-drm200 Manual De Usuario
46
RQT7237
Ad
v
a
nc
e
d
ope
ra
tion
Changing the unit’s settings
See pages 44 and 45 for menu and option details.
1
While stopped
Press [SETUP] to show the menus.
2
Press [
3
,
4
] to select the menu’s tab
and press [
1
].
3
Press [
3
,
4
] to select the menu and
press [ENTER].
4
Press [
3
,
4
] to select the option and
press [ENTER].
The screen now shows the menu again.
≥
Some items require different operations. Follow the on-screen
instructions, or read the following explanations.
instructions, or read the following explanations.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
Panasonic DVD players and recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
≥
Use “1”, the factory set code, under normal circumstances.
1
While stopped
Press [SETUP] to show the menus.
2
Press [
3
,
4
] to select “Set Up” and
press [
1
].
3
Press [
3
,
4
] to select “Remote Con-
trol Code” and press [ENTER].
4
Press [
3
,
4
] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5
While pressing [ENTER] on the
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
The remote control code on the remote control has been set.
6
Press [SETUP]
The following display appears when you use a remote control with a
different code.
different code.
If you are trying to use this unit’s remote control, change its code to
match the unit’s (
match the unit’s (
➜
step 5).
Stereo 1 :Records sound (L1, R1) when DV recording is taking
place.
Stereo
2 :Records added sound such as narration (L2, R2)
subsequent to original recording.
Mix
:Records both Stereo 1 and Stereo 2.
≥
L1+L2 are recorded in L and R1+R2 are recorded in R,
except for SAP. In the case of SAP, Stereo 1 is recorded
when recording to DVD-R or if recording in LPCM.
Details of recording are given in “Select MTS” on
page 45.
except for SAP. In the case of SAP, Stereo 1 is recorded
when recording to DVD-R or if recording in LPCM.
Details of recording are given in “Select MTS” on
page 45.
Common procedures