Panasonic PT-AX200E Manual De Usuario
PICTURE menu
E
NGLISH - 31
Settings
You can adjust the white balance of the projected image.
Setting range: -6 to +6
You can switch automatic adjustment system of the lamp
and the lens iris, which conrol the contrast and black
level, on/off.
and the lens iris, which conrol the contrast and black
level, on/off.
ON:
Automatic adjustment
OFF:
No adjustment
The luminance sensor detects the brightness of the
room and keeps the luminance in balance automatically.
If needed, you can switch this function on/off from
MODE, or adjust it manually from MANUAL by pressing
I H.
room and keeps the luminance in balance automatically.
If needed, you can switch this function on/off from
MODE, or adjust it manually from MANUAL by pressing
I H.
Setting range: -8 to +8
You can perform more detailed image adjustment
manually.
manually.
J
GAMMA
You can adjust linear intensity at 3 levels. Press I
H to increase/decrease 1 point.
H to increase/decrease 1 point.
Setting range: -8 to +8
J
CONTRAST
You can adjust the amount of contrast in RGB
colours individually. Press I H to increase/
decrease 1 point.
colours individually. Press I H to increase/
decrease 1 point.
Setting range: -16 to +16
J
BRIGHTNESS
You can adjust the brightness in RGB colours
individually. Press I H to increase/decrease
1 point.
individually. Press I H to increase/decrease
1 point.
Setting range: -16 to +16
J
COLOUR MANAGEMENT
You can manage your own defined colour settings.
See “Setting your own colour profile” on page 24.
See “Setting your own colour profile” on page 24.
J
NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
system on/off. Press I H to select the required
setting.
ON:
Automatic noise reduction
OFF:
No noise reduction
J
MPEG NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimise block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
system for MPEG format images on/off. The
system minimise block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON:
Active
OFF:
Deactive
J
CINEMA REALITY
You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON:
Active
OFF:
Deactive
COLOUR TEMPERATURE
DYNAMIC IRIS
LIGHT HARMONIZER
NOTE:
• To assure correct performance of the LIGHT
HARMONIZER, do not interrupt the light on to the
luminance sensor. See “Projector body” on page 12.
luminance sensor. See “Projector body” on page 12.
ADVANCED MENU
Levels
Default setting
GAMMA HIGH
0
GAMMA MID
0
GAMMA LOW
0
RGB
Default setting
CONTRAST R
0
CONTRAST G
0
CONTRAST B
0
Less
reddish
Less
bluish
RGB
Default setting
BRIGHTNESS R
0
BRIGHTNESS G
0
BRIGHTNESS B
0
NOTE:
• MPEG NR system is not available with COMPUTER/
HDMI (VGA480) signals.
NOTE:
• CINEMA REALITY is effective only with interlace
signals.
http://www.pureglare.com.au