Panasonic sa-xr707 Manual De Usuario

RQT8979

SPEAKERS B
• Playback is in 2-channel stereo when you select “SPEAKERS B” only.
• When only “SPEAKERS B” is selected and the input source is

surround, “

2CH MIX” appears on the display.

• Selected speakers output sounds assigned to front 2 channels

when you make DVD ANALOG 6CH connections.

• If you select “SPEAKERS B” only, the following are set automatically irrespective of

settings selected in “Setting speakers and their sizes” (á page 39).
Speaker size: “

LARGE ” 

Subwoofer: “

NO ” (Bass is output from the front speakers.)

• Settings made through the auto speaker setup (á pages 26

and 27) do not affect the setting for SPEAKERS B.

• ELS Surround sound cannot be properly played back.
MULTI ROOM
• When you press [SPEAKERS A] or [SPEAKERS B],

consolidated 2-channel stereo sound is output from front and
surround speakers (in the original room).
MULTI ROOM is canceled when you press [SPEAKERS A] or [SPEAKERS B].

• ELS Surround sound cannot be properly played back.
• BI-AMP or ADVANCED DUAL AMP turns off when you

perform MULTI ROOM playback.

• “

SPEAKERS ARE OFF ” is displayed when you press and hold [SPEAKERS

B] for 2 seconds without selecting “SPEAKERS A” and “SPEAKERS B”.

ADVANCED DUAL AMP (á page 55)
• The unit takes advantage of unused amps, and runs one speaker with 2

amps when this function is on. ADVANCED DUAL AMP offers you
sounds that are clearer and higher in audio quality than those available
in normal playback. In 2-channel stereo playback, 3 speaker amps drive
front speakers. The operation is called the triple amp mode.

2-channel stereo playback: Front, surround and surround back
speaker amps are used for driving front speakers (triple amp mode).
5.1-channel playback: Front and surround back speaker amps
are used for driving front speakers (dual amp mode).

• When surround speakers are connected wirelessly (á page 24), the

unit uses the wireless system amp for 5.1-channel playback. Under
the condition, front speakers are driven in the triple amp mode.

BI-AMP (á page 55)
• The unit takes advantage of the front speaker and the surround

speaker amps, and drives the speakers’ high-frequency and low-
frequency ranges separately when this function is on.

• ADVANCED DUAL AMP is available with BI-AMP. When combined, the

two functions enhance clarity and audio quality of stereo sounds.

• When you make bi-wire setting (á page 22), both BI-AMP and

ADVANCED DUAL AMP take effect as long as overlap is possible. In
such case, ADVANCED DUAL AMP activates in the dual amp mode.
Select “

OFF ” in “Canceling BI-AMP (using the triple amp mode)”

(á page 40) when you wish to use the triple amp mode.

• In 2-channel playback of PCM signal, when its sampling

frequency is 176.4 kHz and 192 kHz, BI-AMP is turned OFF
and ADVANCED DUAL AMP is turned ON.

• You cannot use BI-AMP with analog 6-channel connections for

DVD-Audio sources.

Playing DVD-Audio
Make the following speaker settings on the DVD recorder or the
DVD player. (They are normal factory settings for the DVD
recorder and the DVD player.)
• Speaker size: “

LARGE ” for all speakers

• Speaker presence: present for all speakers
• Distance setting: 0 or an equal distance for all speakers

Switch “

” on the display off by

pressing [SPEAKERS A].

 

Select “

MULTI ROOM ” in “Making MULTI ROOM setting” (á page 41).

• When the function is on, the “MULTI

ROOM” indicator lights on.

• This function is not available while

muting is on.

ADVANCED DUAL AMP activates automatically when you use 2-channel stereo playback or 5.1-channel playback.
The “ADVANCED DUAL AMP” indicator stays on while this function 
is on.

• You can also set the ADVANCED 

DUAL AMP off (á page 40).

• Connect bi-wire speakers (

á

 page 22).

• Select “

YES ” in “Making bi-wire setting” (

á

 page 22).

• Press [SURROUND] off (

á

 page 28).

• The “BI-AMP” indicator stays on while

BI-AMP is at work.

• Refer to “Making BI-AMP settings” 

(á page 40) for detailed settings.

Connect the unit to a DVD recorder or DVD player using the HDMI cable (

á

 page 15) or a

digital cable (COAXIAL1) (

á 

pages 16 and 17).

• Make analog 6-channel connections (

á

 page 20).

• Select “SPEAKERS A” or turn bi-wire 

speakers on (á page 28).

• Switch the input source to “

BD/DVD ” (

á

 page 28).

“DVD 6CH ” is displayed.

When the unit is connected to a 
DVD recorder
Playback is unavailable while the 

input source is “

DVR  ”. Make 

analog 6-channel connections and 

switch the mode to “

BD/DVD  ”.

• To cancel, press and hold until 

“

 

” is displayed.

You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1 Cancel the “DVD 6CH ” setting (

á

2 Set the input signal to “ANALOG ” in “Setting input signals” (

á

B

SPEAKERS

B

B

SP

EAKERS

A

B

SPEAKERS

BD/DVD

PLAYER

ANALOG 6CH