Panasonic SL-SK434 Manual De Usuario

Descargar
Página de 6
A
OPEN
Location of controls/Connection to other equipment
Earphones
4
AC adaptor
The AC adaptor differs according to the
area.
Connect the AC adaptor to the
household mains socket first.
To headphone jack (Ë)
Battery
compartment
Hold
switch
Headphone
jack
Open switch
Skip/Search
Play/
Pause
Stop/
Turn off
Volume control
To DC IN jack
Display panel
Play mode selection
Memory/Recall/
Digital Re-master/
Anti-skip mode selection
Audio system
Adjust the
volume level on
the audio system.
To household
mains socket
Car power adaptor (SH-CDC9)
(not included)
You can recharge the batteries
with this connection.
Some cannot 
be connected.
Car audio
To CD or AUX
terminals
Audio cable (not included)
Car stereo cassette adaptor 
(SH-CDM10A) (not included)
Set the unit’s volume to 10–15.
Sound quality 
selection
Set the unit’s volume to 10–15.
Lens
Plug type: 
3.5 mm stereo
Turn off this unit and the other equipment before connection.
OPEN
As a safety precaution this unit is constructed so it is impossible to charge
ordinary batteries. For details, check with your dealer.
Rechargeable batteries (not included)
Charge before initial use.
1 2
The AC adaptor differs according to the area.
The battery indicator (
) scrolls while recharging and disappears when
finished (about 4 to 5 hours). 
You can recharge the batteries before they are fully discharged.
Fit the battery lid so it is secure and flush with the battery compartment. If it
comes loose, it may scratch your discs.
Dry cell batteries (not included)
After disconnecting the AC adaptor, insert two “LR6, AA, UM–3” alkaline batteries.
Insert the same way as the rechargeable batteries.
The battery indicator
DC IN jack
5 2
: 2
The unit switches off shortly after
the indicator starts flashing.
This indicator appears when the unit is on.
AC adaptor
To household
mains socket
When charging, use only the following
Panasonic rechargeable Ni-Cd batteries.
P-3GAVE/2B (set of 2)
You cannot charge any other type
of rechargeable/dry cell batteries.
Play time
➪Specifications, page 2 
General
The unit is in the standby condition when the AC adaptor is connected. The
primary circuit is always “live” as long as the AC adaptor is connected to an
electrical outlet.
Before playing starts the battery indicator may flash although the batteries are not
drained. It appears correctly once you start play.
Make sure the unit is off when recharging.
∫ 
Removing batteries
Close
securely.
Power Supply