Panasonic tc-15lv1l Manual De Usuario

Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.

OUTPUT

S-VIDEO

VIDEO

L-AUDIO-R

OUTPUT

INPUT

ANT OUTPUT

ANT INPUT

Connect the cable from
the Output terminal on
the back of the VCR to
t h e   A n t e n n a   i n p u t
terminal on the left side
of the TV.

Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna input terminal on the
back of the VCR.

ANTENNA
TERMINALS ON
THE LEFT SIDE
OF THE TV

VCR

CABLE BOX

TERMINAL ON THE BACK

OF THE CABLE BOX

Incoming Cable from
Antenna or Cable TV
System

TO VCR

Connect the cable from the
antenna or cable system to the
Input terminal on the back of the
CABLE BOX.

Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel

to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT.

Wall

Floor

Example of 
Wall-Mount Installation

Release the lock in the 
lower center of the stand 
cover.
Slowly pull the cover 
downward.

Installation Option
Wall-mount bracket (model No.: TY-WK15TA2U)
If you require further information, contact the dealer where you purchased this product.

Installing / Removing the Stand Cover
 • The optional wall-mount bracket can be installed only after

the TV stand is removed. Follow the instructions below to
remove the stand cover.

 • Once wall mount has been mounted, replace stand cover.
 • For detailed TV stand installation/removal steps, refer to

the installation manual for the wall-mount bracket
(optional).

Insert the 3 upper claws 
of the stand cover into 
the mating slots.
Press in the lower center 
of the stand cover.

Installing on a Wall
 • For reasons of performance and safety, installation using the optional wall-mount

bracket should only be attempted by a qualified installer.

 • Keep the Installation Manual and all the removed parts in a safe place for future use.