Panasonic tc-42px34 Manual De Usuario

41

 Care and Cleaning

 T

echnical 

Information

Do not display a picture in 4:3 mode for an extended period, as this can cause 

“Image retention” to remain on either or both sides of the display field.

To reduce the risk of such “Image retention”, change the brightness of the side 

bars.

See page 33 for more information

 

●

The side bar may flash (alternate black/white) depending on the picture.

Side Bar

4:3

Screen

Display

Image retention

* Mark: Applicable input signal for Component (Y, P

B

, P

R

), HDMI

525 (480)/60i

15.73

59.94

*

*

525 (480)/60p

31.47

59.94

*

*

750 (720)/60p

45.00

59.94

*

*

1,125 (1,080)/60i

33.75

59.94

*

*

1,125 (1,080)/60p

67.43

59.94

*

1,125 (1,080)/60p

67.50

60.00

*

1,125 (1,080)/24p

26.97

23.98

*

1,125 (1,080)/24p

27.00

24.00

*

 

●

Signals other than those shown above may not be displayed properly.

 

●

The above signals are reformatted for optimal viewing on your display.

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we 
disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral 
devices.

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-

free cloth.

 

●

If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted 

by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the 

display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.

 

●

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile 

substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

 

●

If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.

Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.

 

●

Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.

If water droplets get inside the unit, operating problems may result.

 

●

Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface 

may be adversely affected or the coating may peel off.

 

●

Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.

 

●

Cleaning

Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small 

amount of mild liquid dish soap has been added and then wipe with a dry cloth. 

Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If 

using a chemically-treated cloth, follow the instructions supplied with the cloth.)

 

●

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with 

rubber, vinyl products, or the like. (Doing so will cause deterioration.)