Panasonic th-50px20up Manual De Usuario

Descargar
Página de 72
17
Cable Connection
How to connect the HDMI Terminal
Less than
4"(10 cm)
HDMI∗
1
 is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jack supports
both video and audio information.
This HDMI∗
1
 input can be connected to an EIA/CEA-861/861B∗
2
 compliant consumer electronic device, such as a Set
Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the HDMI terminal of
this television, high-definition pictures can be displayed on the screen in their digital form.
(HDMI : High Definition Multi media Interface)
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincluding
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability details.
4. (HDMI IN)Please refer to page 24.
 •
 The HDMI terminal of this equipment is TYPE A.
If the external device has DVI output only, use a
DVI to HDMI adaptor cable∗
3
 to connect to the HDMI
jack. Also, connect the Audio out signal from the
external device.
(Set Top Box or DVD player) to the AUDIO IN∗
4
 jacks
side the HDMI input.
This model support following format.
Please adjust the format of connecting equipment.
1080i
480P
480i
 
No. of dots (H 
× 
× 
× 
× 
× V)
 1,920 
× 
× 
× 
× 
× 1,080i
 720 
× 
× 
× 
× 
× 480P
 640 
× 
× 
× 
× 
× 480P
 720(1,440) 
× 
× 
× 
× 
× 480i
Vertical scanning frequency(Hz)
 59.94/60
 59.94/60
 59.94/60
 59.94/60
Applicable VIDEO Signal
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
when the digital sound signal is included at connecting HDMI equipment.
Sumpling freguency
48KHz / 44.1KHz / 32 KHz
Notes:
(1)This HDMI connector is Type A.
(2)If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal Output setting,
use the component Video input (or the S video Input or Video Input). In this case the picture will be displayed as an
analog signal.
(3) HDMI-DVI conversion cable (TY-SCHO3DH):available on Panasonic Website.
(www.panasonic.com)
HDMI Cable(not included)
HDMI
signal out
Set Top Box
DVD player
Audio Cable (not included)