Panasonic tx-47p800h Manual De Usuario

Prior to adjustment, tune the broadcast signal to the video input signal
and operate the set for more than 60 minutes. If the location or direction
of the set is changed or moved, the display may be out of alignment.
If necessary, carry out the following procedures once with PAL signal
and again with the NTSC signal.

Press to display the Setup Menu.

Press to select the “CONVERGENCE”.

Press to  access to the “CONVERGENCE” menu.

SET UP

Press to select the  “CONVERGENCE 1” or the “CONVERGENCE 2”.

Press to access to the function.

Example:
CONVERGENCE 1
is selected.

Vertical centre marker

Horizontal centre marker

Press to align the horizontal red line with the horizontal blue line.
(Becomes a white line)

Press to align the vertical red line with the vertical blue line.
(Becomes a white line)

Press  N  button to adjust the blue mode.
(Stores RED)

Press to align the horizontal blue line with the horizontal yellow line.
(Becomes a white line)

Press to align the vertical blue line with the vertical yellow line.
(Becomes a white line)

Press  N  button to adjust the green mode.
(Stores BLUE)

Press to align the horizontal green line with the vertical centre maker.

Press to align the vertical green line with the horizontal centre maker.

Press at any time to return to the normal viewing.

Press  N  button to adjust the red mode. (Stores GREEN)

Only when you cannot adjust with RED and BLUE proceed to the following GREEN adjustment.

TV/AV

Vertical centre marker

Horizontal centre marker

Repeat above adjustment for each position.