Panasonic vw-dtm21e Manual De Usuario
48
Check that the setup is
correct
Check that the DV Interface Board has been
properly installed as described below. (When using
DV Editing Software with DV Interface Board/VW-
DTM21E)
properly installed as described below. (When using
DV Editing Software with DV Interface Board/VW-
DTM21E)
Right-click on [My computer] and select
[properties]
[properties]
Click on the [Device Manager] tab
Double-click on the icon [1394 Bus Controller]
If [IEEE1394 Texas Instruments OHCI Compliant
IEEE1394 Host Controller] is displayed, the setup is
correct.
If [IEEE1394 Texas Instruments OHCI Compliant
IEEE1394 Host Controller] is displayed, the setup is
correct.
Connect the digital video
device (DV Interface
Board)
Connect the digital video device and the PC using
the DV cable (4-6 pin). For further information about
the connection, read the paragraph Connection.
the DV cable (4-6 pin). For further information about
the connection, read the paragraph Connection.
Connect the 6-pin side of the DV cable supplied
to the terminal of the DV Interface Board, then
connect the 4-pin side to the digital video device
Before making the connection turn on the digital
video device and start the PC.
to the terminal of the DV Interface Board, then
connect the 4-pin side to the digital video device
Before making the connection turn on the digital
video device and start the PC.
#