Panasonic vlgw001a Manual De Usuario

 

Model No.

 

● This product is a flush mount unit for use only with the monitor station

<VL-GM301A> and sub monitor station <VL-GM001A> for the video intercom
system. It cannot be used with any other units.

(Be sure to observe the following.)

Be sure to observe the following, otherwise malfunctions may result.

■ Avoid installing in the following locations

•Locations that are subject to strong shocks or vibrations.

■ When carrying out installation work

•All cables should be routed at least 30 cm (11 

13

/

16

”) away from electric light

cables or routed in separate tubes.

•Use metal pipes if routing through areas where strong magnetic fields are present.
•None of the connection cables should be unused.

1) Do not modify.

If this is not observed, injury may result. Do not disassemble.

2) Install to a wall that is strong enough to bear the unit’s weight.

If the wall is not strong enough, the unit may fall down and injury may result.
• If the wall is not strong enough, add reinforcement to give it extra strength.

3) Install securely to the wall.

If this is not observed, the unit may fall down and injury may result.

4) Inspect at regular intervals.

If the mounting screws become loose, the unit may fall down and injury may result.

5) Do not install in places where there is lots of humidity or dust or where

the unit may be affected by oil fumes or steam.
If this is not observed, fire or electric shocks may result.

(Check the package contents after opening.)

Embedded mounting box

Makeup panel

Small screw : 4 pcs.
4 mm x 25 mm (

3

/

16

” x 1”)

Template

Please make sure that there is NOT any object within 20cm (8 inches) of the flush
mount unit. This may cause a communication error or malfunction of monitor station
and sub monitor station.