Panasonic wv-cw474 Manual De Usuario
2. Unscrew the red screw for
transport protection with a
Phillips screw driver.
Phillips screw driver.
3. Connect the power cable and the
BNC plug of the video output
cable as described in the section
"Connections".
cable as described in the section
"Connections".
■
Preface
Panasonic's WV-CW474FE colour digital camera is designed for installation on a wall or ceil-
ing board.
ing board.
■
Precautions
The following installation should be made by qualified service personnel or system
installers.
Be sure to use a ceiling board having enough strength to support this camera.
installers.
Be sure to use a ceiling board having enough strength to support this camera.
■
Preparations
The camera can be mounted either of the two ways shown below.
• Using Junction Box
Lay the two ganging junction box (4 in. x 4 in.) on a wall or ceiling. An example is shown
in the column at right.
in the column at right.
Loosen three
screws.
screws.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
N0502-0
3TU001041AAA
Printed in Japan
N 19
Colour CCTV Camera
Instructions
Model No.
WV-CW474FE
■
How to mount the camera
1. Remove the dome cover from the
main body by loosening the three
dome cover mounting screws.
dome cover mounting screws.
The dome cover is fixed with tamperproof
screws.
Loosen the three dome cover mounting
screws by using the supplied bit for tam-
perproof screw.
screws.
Loosen the three dome cover mounting
screws by using the supplied bit for tam-
perproof screw.
(This procedure is also applicable to cases
where you replace the dome cover with an
optional Clear Dome Cover WV-CW1CE.)
where you replace the dome cover with an
optional Clear Dome Cover WV-CW1CE.)
85 mm
(3-3/8")
<Mounting hole pattern>
WV-Q112E
(option)
(option)
85 mm
(3-3/8")
Cable access hole for
3/4" pipe
3/4" pipe
Bracket center
51 mm
(2")
Camera mounting bracket
screw x 4 (procured locally)
screw x 4 (procured locally)
Camera mounting screw x 4 (procured locally)
Seal the screws and screw holes with such a material as silicone
clay (rubber) to prevent entry of water if the camera is installed
outdoors.
Seal the screws and screw holes with such a material as silicone
clay (rubber) to prevent entry of water if the camera is installed
outdoors.
46 mm
(1-13/16")
(1-13/16")
83.5 mm
(3-5/16")
(3-5/16")
4. Secure the camera with four camera mounting screws.
• Using Junction Box
Secure the camera on the junction box with four screws procured locally.
Purchase the screws to match the tapped holes of the junction box.
The mounting holes of this unit accept M4 screws or smaller.
Purchase the screws to match the tapped holes of the junction box.
The mounting holes of this unit accept M4 screws or smaller.
Loosen the dome
cover mounting
screw x3
cover mounting
screw x3
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
volgende normen of andere normatiefve dokumenten,
overeenkomstig de bepalingen van Richtlijnen 73/23/
EEC en 89/336/EEC.
waarop deze verklaring betrekking heeft, voldoet aan de
volgende normen of andere normatiefve dokumenten,
overeenkomstig de bepalingen van Richtlijnen 73/23/
EEC en 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med den følgende standarder eller andre normative
dokumenter i følge bestemmelserne i direktivene 73/23/
EEC og 89/336/EEC.
denne deklaration omhandler, er i overensstemmelse
med den følgende standarder eller andre normative
dokumenter i følge bestemmelserne i direktivene 73/23/
EEC og 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt
till vilken denna deklaration hänvisar är i överensstäm-
melse med standarddokument, eller andra normativa
dokument som framstölls i Direktiv 73/23/EEC och 89/
336/EEC.
till vilken denna deklaration hänvisar är i överensstäm-
melse med standarddokument, eller andra normativa
dokument som framstölls i Direktiv 73/23/EEC och 89/
336/EEC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direkti-
ivien 73/23/EEC ia 89/336/EEC. säädöksiä.
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direkti-
ivien 73/23/EEC ia 89/336/EEC. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende doku-
menter som fælger bestemmelsene i direktiven 73/23/
EEC og 89/336/EEC.
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende doku-
menter som fælger bestemmelsene i direktiven 73/23/
EEC og 89/336/EEC.
We declare under our sole responsibility that the product
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directives EEC/73/23 and EEC/89/336.
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directives EEC/73/23 and EEC/89/336.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING
TEXT CAREFULLY.
TEXT CAREFULLY.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code.
the following code.
Green-and-yellow:
Earth
Blue:
Neutral
Brown:
Live
As the colours of the wire in the mains lead of this appli-
ance may not correspond with the coloured markings identify-
ing the terminals in your plug, proceed as follows.
ing the terminals in your plug, proceed as follows.
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
letter E or by the earth symbol
I
or coloured green or
green-and-yellow.
The wire which is coloured blue must be connected to
the terminal in the plug which is marked with the letter N or
coloured black.
coloured black.
The wire which is coloured brown must be connected to
the terminal in the plug which is marked with the letter L or
coloured red.
coloured red.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
• Using Optional Bracket WV-Q112E
An optional bracket WV-Q112E is available when you mount the camera on a flat sur-
face with a cable access hole as shown in the figure. Purchase four screws locally to
secure the bracket on the surface. Another four screws are included with the bracket to
secure the camera on it.
face with a cable access hole as shown in the figure. Purchase four screws locally to
secure the bracket on the surface. Another four screws are included with the bracket to
secure the camera on it.
Note:
The WV-Q112E is not a waterproof type, so it requires sealing for outdoor use.
Refer to Waterproofing Process in the column at right.