Panasonic WV-CP160 Manual De Usuario
Pick-up Device:
752 (H) x 582 (V) pixels, Interline Transfer CCD
Scanning Area:
4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of
1/3” pick-up tube)
1/3” pick-up tube)
Scanning:
625 lines/50 fields/25 frames
Horizontal:
15.625 kHz
Vertical:
50 Hz
Synchronization:
Multiplexed Vertical Drive (VD2) by use of specified
camera drive unit.
camera drive unit.
Video Output:
1.0 V[p-p] PAL composite 75
Ω
/through
camera drive unit
Horizontal Resolution:
480 lines
Signal-to-Noise Ratio:
50 dB (AGC OFF, weight ON)
Dynamic Range:
48 dB
Minimum Illumination:
0.4 lx (0.04 footcandle) at F0.75 [Equivalent to 0.8 lx
(0.08 footcandle) at F1.4]
(0.08 footcandle) at F1.4]
Gain Control:
AGC ON or OFF (SET UP MENU) selectable
White Balance:
ATW or AWC (SET UP MENU) selectable
Aperture:
Set Variable (SET UP MENU) Sharp-Soft selectable by
detail level selector
detail level selector
Electronic Light Control:
ALC/ELC
Super Dynamic2:
ON or OFF (SET UP MENU) selectable
Electronic Shutter Speed:
1/50 (OFF), 1/120 1/250, 1/500, 1/1 000 1/2 000,
1/4 000, 1/10 000 s selectable
1/4 000, 1/10 000 s selectable
Lens Mount:
CS-mount
ALC Lens:
DC drive
Ambient Operating Temperature:
–10°C - +50°C (14°F - 122°F)
Ambient Operating Humidity:
Less than 90 %
Power Source:
From the specified monitor or camera drive unit
Power Consumption:
350 mA
Dimensions (without lens):
68 (W) x 65 (H) x 126 (D) mm
[2-11/16” (W) x 2-9/16” (H) x 4-15/16” (D)]
[2-11/16” (W) x 2-9/16” (H) x 4-15/16” (D)]
Weights (without lens):
0.375 k
g (0.8 lbs.)
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.
Specifications are subject to change without notice.
SPECIFICATIONS
OPTIONAL ACCESSORIES
Lenses :
WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3,
WV-LA908C3, WV-LZ61/10, WV-LZ61/15, WV-LZ60/2, WV-LZ62/8
WV-LA908C3, WV-LZ61/10, WV-LZ61/15, WV-LZ60/2, WV-LZ62/8
STANDARD ACCESSORIES
Body Cap .......................................................................1 pc.
Camera Mounting Bracket .............................................1 pc.
Camera Mounting Bracket .............................................1 pc.
When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects
bright light, smear or blooming may appear. Therefore, the camera should be operated
carefully in the vicinity of extremely bright objects to avoid smear or blooming.
bright light, smear or blooming may appear. Therefore, the camera should be operated
carefully in the vicinity of extremely bright objects to avoid smear or blooming.
;
;
;
;
;
;
Bright object
Smear
PREVENTION OF BLOOMING AND SMEAR