Panasonic wv-cs600 Manual De Usuario
How to assemble the cable with the accessory
connector
connector
Strip back the cable jacket approx. 3 mm (0.1 inch)
and separate the individual conductors.
and separate the individual conductors.
Recommended wire gauge sizes for 24V AC line.
#24
(0.22mm
2
)
Copper wire size
(AWG)
(AWG)
Length
of Cable
(Approx.)
of Cable
(Approx.)
(m)
(ft)
#22
(0.33mm
2
)
#20
(0.52mm
2
)
#18
(0.83mm
2
)
20
30
45
75
65
100
160
260
Accessory Connector Information
Pin No.
Power Source
1 :
2 :
3 :
4 :
24 V AC LIVE
24 V AC NEUTRAL
Ground
Not use
Contact
Up
Wire
Prepare the individual conductors for clamping.
Use MOLEX band tool part number 57027-5000
(for UL-Style Cable UL1015) or 57026-5000 (for UL-
Style UL-1007) for clamping the contacts.
After clamping the contacts, push them into the
proper holes in the accessory connector of this
camera until they snap in place.
Use MOLEX band tool part number 57027-5000
(for UL-Style Cable UL1015) or 57026-5000 (for UL-
Style UL-1007) for clamping the contacts.
After clamping the contacts, push them into the
proper holes in the accessory connector of this
camera until they snap in place.
1. Shrinking the cable-entry seal is a one-time
procedure. Do not shrink the cable-entry
seal until it has been ascertained that the
unit is functioning.
CONNECT THIS TO 24V AC CLASS 2
POWER SUPPLY ONLY.
seal until it has been ascertained that the
unit is functioning.
CONNECT THIS TO 24V AC CLASS 2
POWER SUPPLY ONLY.
2. To prevent fire or electric shock hazard, the
UL listed wire (VW-1, style 1007) should be
used for the cable for 24V AC input
terminals.
used for the cable for 24V AC input
terminals.
Contact
Insert
Up
A
Approx.
0.1 inch
0.1 inch
Insert the wire until A position
and clamp the contacts.
and clamp the contacts.
Wire
Up
Wire
Contact
Up
Contact
Wire
Approx.
3 mm (0.1 inch)
3 mm (0.1 inch)
Insert the wire until A position
and clamp the contacts.
and clamp the contacts.
1
3
2
4
• Power supply connection
CAUTIONS
- 33 -
CONNECTIONS
Precaution:
The following connections should be made by qualified service personnel or system installers.
Note:
When powered up, the unit performs a self-check (including one panning,
tilting, zooming and focusing operation).
✻ Coaxial cable length should be less than 1200m (5C - 2V)
To Video IN
(CAMERA IN)
(CAMERA IN)
Video Output
Cable
Cable
24V AC
220 - 240V AC
BNC Plug
Coaxial Cable
(5C - 2V)
(5C - 2V)
Data cable (Only for WV-CSR600)
RS485 cable
BNC Plug
WV-CS604E orWV-BS504E