Gateway convertible notebook cx200 cx2000 m280 m285 s-7200 ta1 ta6 ta7 Manuales De Servicio
Replacing convertible notebook components
48
Replacing the LCD assembly lid
Tools you need to complete this task:
v
Screws removed during this task:
To replace the LCD assembly lid:
1
Complete the steps in
2
If the convertible notebook has wireless networking built in, unplug the wireless antennas
by following the steps in
by following the steps in
3
Remove the hinge covers by following the steps in
.
4
Remove the keyboard cover by following the steps in
5
Remove the LCD assembly by following the steps in
.
6
Remove the inverter by following the instructions in
.
7
Remove the power button board by following the instructions in
8
Remove the tablet button board by following the instructions in
.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
4 or 6 black 2.5*8.0 (LCD
hinge to notebook)
hinge to notebook)
4 black 2.5*8.0 (LCD
panel)
panel)
4 or 8 black 2.5*5.0 (LCD
panel front)
panel front)
1 chrome 2.5*2.5
(Inverter)
(Inverter)
2 chrome 2.5*6.0
(Power button
board)
(Power button
board)
2 chrome 2.5*6.0
(Tablet button board)
(Tablet button board)
4 black 2.5*3.5 (LCD
hinge to LCD panel)
hinge to LCD panel)