Gateway 7250R Manual De Usuario

Error messages          

This section lists common error messages that you may see. These messages 
often indicate procedural errors such as an incorrect keystroke or a 
write-protected diskette. Some messages, however, may indicate a problem 
that requires you to consult the troubleshooting section of this manual.

The display setup is incorrect

In the Control Panel window (Start | Settings | Control 
Panel), double-click Display and check the settings. 
The correct video type should be selected, along with 
a supported resolution. Check your monitor and video 
controller documentation for details.

The video card has failed

Try another video card.

The monitor controls are 
not properly adjusted

Adjust the monitor controls until the text becomes clear. (See 
your monitor documentation for more information.)

The connector or cable is 
damaged

Check the connector and cable for bent or damaged pins.

The surge protector or 
UPS is damaged

Disconnect the monitor power cable, then connect it directly 
to the power source.

The monitor is too close 
to a source of electrical 
interference

Move the monitor away from sources of electrical 
interference, such as televisions, unshielded speakers, 
microwave ovens, fluorescent lights, and metal beams or 
shelves.

The monitor needs to be 
degaussed

Turn off the server and monitor and leave them off for at least 
a half hour, then restart the system.

Access denied

Try saving to a new file or diskette.

Move the write-protection tab over the hole on the back of 
the diskette.

8506162.book  Page 97  Wednesday, May 10, 2000  10:21 AM