Gateway 7250R Manual De Usuario
20
Case Access
3
Remove the three screws from the top edge of the back panel.
4
Slide the top panel slightly to the back, disengaging the top edge of the
panel from the top of the front panel.
panel from the top of the front panel.
5
Lift the panel out and away from the chassis.
Closing the case
Close the chassis as soon as you finish installing or removing components
so that dust and dirt do not collect inside the server.
so that dust and dirt do not collect inside the server.
Replacing the top panel
You must replace the top panel before you can operate the server. If you do
not, a system intrusion event is logged by the system management hardware.
Be careful not to pinch any cables in the panel as you replace it.
not, a system intrusion event is logged by the system management hardware.
Be careful not to pinch any cables in the panel as you replace it.
8506162.book Page 20 Wednesday, May 10, 2000 10:21 AM