Gateway 860 Manual De Usuario
29
Turning on your NAS
www.gateway.com
Turning on your NAS
After making sure that you have set up the NAS correctly and connected all
the required cables, you can turn on your NAS.
the required cables, you can turn on your NAS.
To turn on your NAS:
1
Open the control bay cover then press the power button. The NAS starts
and displays a welcome message. After that, a series of power-on self test
(POST) messages appear. The POST messages indicate whether the NAS is
running correctly.
and displays a welcome message. After that, a series of power-on self test
(POST) messages appear. The POST messages indicate whether the NAS is
running correctly.
2
If the NAS does not turn on or boot after pressing the power button, go
to the next section for the possible cause of the boot failure.
to the next section for the possible cause of the boot failure.
3
Aside from the POST messages, you can determine if the NAS is in good
condition by checking if the following occurred:
condition by checking if the following occurred:
■
Power indicator on the front panel is green.
■
Num Lock, Caps Lock, and Scroll Lock LEDs on the keyboard are on.
Important
Your default Storage Server 2003 password is “gateway”.