Gateway 860 Manual De Usuario
45
Main menu
www.gateway.com
Manual
This function gives you the option to manually enter the IP, net mask and
gateway IP address of the LAN2 host.
gateway IP address of the LAN2 host.
To configure LAN2 manually:
1
Press the
Enter
button.
2
Press the
Next
or
Previous
button to select
Network
on the Main menu, then
press the
Enter
button.
3
Select
LAN 2
, then press the
Enter
button.
4
Select
Manual
, then press the
Enter
button.
5
Select
IPAddr2
, then press the
Enter
button.
6
Enter the IP address by pressing the
Enter
button to increase number input.
Press the
Next
button to move the cursor to input the remaining numerical
value of the IP address, then press the
Exit
button.
(Example) 192.163.001.010
7
Select
NetMask2
, then press the
Enter
button.
8
Enter the subnet mask, then press the
Exit
button to end input.
9
Select
GWIP2
, then press the
Enter
button.
10
Enter the gateway IP address, then press the
Exit
button to end input.
11
Select
OK
, then press the
Enter
button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
appears.