kymco mo p250 Manuales De Servicio
5
. ENGINE REMOVAL/INSTALLATION
5-2
PEOPLE 250
ENGINE REMOVAL
Drain the coolant. (!3-9)
Remove the met-in box, carrier. (!2-6)
Remove the frame body cover, center cover
Remove the frame body cover, center cover
and rear fender A together. (!2-6)
Remove the exhaust muffler. (!2-10)
Remove the exhaust muffler. (!2-10)
Disconnect all of the A.C. generator.
Remove the nut to disconnect the starter
motor wire that goes to the starter relay.
Disconnect the secondary air vacuum tube
and fuel pump vacuum tube from inlet pipe.
Disconnect the air inlet hose (v-belt chamber)
from frame.
Loosen the intake manifold band (air cleaner
tube and inlet pipe).
Disconnect the radiator air ventilated tube and
Disconnect the radiator air ventilated tube and
thermosensor wire coupler from thermostat.
Starter Relay
Intake
Manifold
Band
Fuel Pump Vacuum Tube
A.C. Generator Wire Connectors
Nut
Starter Motor Wire
Secondary Air
Vacuum Tube
Air Inlet Hose
(V-belt Chamber)
Inlet Pipe
Thermosensor Wire Coupler
Radiator Air
Ventilated Tube
Thermostat