JVC kd-nx901 Manual De Usuario

114

ENGLISH

•  “Push Reset” appears 

on the display, and the 
control panel movement is 
freezed.

Something is blocking the 
control panel movement.

Remove the obstacle, then 
reset the receiver (see page 2).
• If this does not work, 

check if the installation has 
been correctly done.

•  Sound cannot be heard 

from the speakers.

The volume level is set to the 
minimum level.

Adjust it to the optimum 
level.

Connections are incorrect.

Check the cords and 
connections.

•  The receiver does not 

work at all.

The built-in microcomputer 
may have functioned 
incorrectly due to noise, etc.

Reset the receiver (see page 
2).

•  SSM automatic presetting 

does not work.

Signals are too weak.

Store stations manually.

•  Static noise while listening 

to the radio.

The antenna is not connected 
firmly.

Connect the antenna firmly.

• Disc cannot be 

recognised—“No Disc,” 
“Loading Error,” or “Eject 
Error” flashes.

The DVD/CD player may 
have functioned incorrectly.

Eject the disc forcibly (see 
page 4).

•  “REGION CODE 

ERROR!” appears on the 
monitor.

Disc with an incorrect 
Region Code is inserted.

Insert a disc with a proper 
Region Code (see page 6).

•  DVD-R/RW or CD-R/RW 

cannot be played back.

•  Tracks on the DVD-R/RW 

or CD-R/RW cannot be 
skipped.

Disc is not finalized.

•  Insert a finalized disc.
•  Finalize the disc with the 

component which you used 
for recording.

•  Disc can be neither played 

back nor ejected.

The DVD/CD player may 
have functioned incorrectly

Eject the disc forcibly (see 
page 2).

•  Disc sound and picture are 

sometimes interrupted.

You are driving on rough 
roads.

Stop playback while driving 
on rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and 
connections.

EN103_122_KD-NX901[E]fb.indd   114

EN103_122_KD-NX901[E]fb.indd   114

05.3.17   2:11:40 PM

05.3.17   2:11:40 PM