Toshiba 42L6200U Manual De Usuario
126
Picture and Sound Controls
Adjusting the audio
Adjusting the range
You can adjust bass and treble.
1
Press the MENU button. Select SETTINGS, SOUND, and
then Bass or Treble.
then Bass or Treble.
2
Press the ( / arrow) buttons to adjust the range, and then
press the EXIT button.
press the EXIT button.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
Dolby
®
Digital decoder or other digital audio systems to the TV’s
DIGITAL AUDIO OUT terminal.
1
Tune to a digital source on the ANT/CABLE input.
2
Press the MENU button. Select SETTINGS,
PREFERENCES, AV Connection, and then press the OK
button.
PREFERENCES, AV Connection, and then press the OK
button.
3
Press the ( / arrow) buttons to select Digital Audio Output.
4
Press the ( / arrow) buttons to select Auto or PCM. Press
the EXIT button.
the EXIT button.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital and Dolby
®
Digital Plus
dynamic range so you can switch from digital to analog broadcasts
at the same dynamic range.
at the same dynamic range.
1
Press the MENU button. Select SETTINGS, SOUND, and
then Dynamic Range Control.
then Dynamic Range Control.
2
Press the ( / arrow) buttons to select On.
This feature is available when Dolby
®
Digital or Dolby
®
Digital Plus
is input to the TV in the following situations:
❖
When tuned to a digital RF channel
❖
When an HDMI
®
input is used
This feature is automatically set to Off when Dynamic Volume
(Audyssey Dynamic Volume
(Audyssey Dynamic Volume
®
) is set to Low or High.
This feature will also affect Digital Audio Output when the optical
audio output format is set to PCM.
audio output format is set to PCM.
NOTE