Toshiba 42wh18b, 50wh18b Manual De Usuario

17

ADDITIONAL FEATURES

AV connections and input selection

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.

Again, from the 

select 

.

Using the Sor R buttons change the 

option to either 

or

EXT 3.

= The picture on screen

= The last television programme selection.

= the picture from equipment connected

to Scart 1.

= the picture from equipment connected

to Scart 3 or the front input sockets.

Selecting the OUTPUT signal for Scart 2

This feature allows you to specify the type of signal going
into 

Scarts 2

(

) or 

3

(

) on the back of the

television and the sockets on the front (which are also 

). 

is the most common and comes from

standard video recorders and Set Top Boxes whereas 

signals are less common. (Please refer to the

manufacturer’s specification.)

From the 

select 

and with the S or R button select either 

or

as the required 

for 

and 

.

Input Selection

This set is provided with 2 digital audio inputs – DA-1
and DA-2 – so that, for example, a DVD player and a
games console can stay permanently connected. 

Having connected the video signal from your DVD to,
say, COMPONENT VIDEO INPUT (EXT 4) and from your
games console to Scart 3 (EXT 3) you will now need to
connect the audio cables to the inputs on the back of the
set, then match the two up.

This feature enables you to select the source to 

from Scart 2. e.g. If you connect a stereo Set T

op Box

to Scart 1 and a stereo video recorder to Scart 2, and

select 

as the 

output (i.e. you will output

the signal received through Scart 1 directly out to

Scart 2), you will be able to record the stereo Set T

op

Box transmission in stereo.

Most video recorders and Set Top Box receivers send a
signal through the Scart lead to switch the TV to the
correct Input socket. Alternatively press the external
source selection button 

B

repeatedly until you see the

picture from your equipment. You must use this button to
view equipment connected using the COMPONENT
VIDEO INPUT (

).

on the screen indicates that the external

source has been set as a digital audio input, see below.
An 

e.g. 

, indicates the input is set for an S-Video

signal.

If you have connected to DA-1 (optical), select 

from the 

and press

the Q button to highlight 

then

with the Sor R buttons, select the appropriate
video input, for example EXT 4 for the DVD player.

Then for the 2nd connection, press the Q button to
highlight 

(coaxial) then with the

S or R button, select the appropriate video input,
for example, EXT 3 for the games console.