Toshiba 42wh18b, 50wh18b Manual De Usuario

On this television the red, green and blue images
are projected separately onto the screen. They

converge to form a full colour picture and when they
converge correctly you will see a clear screen. It is
especially apparent when viewing cartoons.

The colour convergence is factory set and should need
little or no adjustment. However, convergence may drift
over time or if you move the TV. 

From the 

select 

.

To adjust the colours, press the RED or BLUE
button to select RED or BLUE and then the    

S or R and P or Q buttons to adjust until the
white cross has no 'shadow'.

Press the 

button to go back to the TV screen

to check the picture. If more adjustment is needed,
simply repeat steps 1 and 2 above.

If the edges of the screen are not right, select the
numbers in turn e.g. number 1 to select the top
left hand corner of the screen, and repeat step 2.

Press 

to finish.

There is little or no colour…
When using an external source, for instance, a 

poor quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The television
is factory set to 

in the 

menu to

automatically display the best colour system.

From the 

menu select 

With the Sor R button, choose between 

or 

.

This is sometimes due to condensation if the room
temperature rises rapidly or if the TV is moved

from a cold room to a warm room. If you leave the set
turned on for a while this should improve the images.

26

FOR YOUR GUIDANCE

If you experience what seem like problems operating your TV, we recommend you read through these 
simple checks before calling the helpline. 

26

ff

f

f

Check that the mains switch is on and check all
the connections. Press the Standby button 

i

on

the remote control to make sure that the TV is not in
Standby mode.

☛

Yes, interference or a weak signal. Try a different
TV station.

may help.