Toshiba ASD-G9ETH Manual De Usuario

 

  

2

ICC 

 

• 

Please use the interface only when the ambient temperature of the 
environment into which the unit is installed is within the following 
specified temperature limits: 

Operation: -10 

∼ +50°C (+14 ∼ +122°F) 

Storage: -40 

∼ +85°C (-40 ∼ +185°F) 

• 

Avoid installation locations that may be subjected to large shocks or 
vibrations. 

• 

Avoid installation locations that may be subjected to rapid changes in 
temperature or humidity. 

• 

Proper ground connections are vital for both safety and signal reliability 
reasons.  Ensure that all electrical equipment is properly grounded. 

• 

Route all communication cables separate from high-voltage or noise-
emitting cabling (such as ASD input/output power wiring). 

• 

Do not touch charged parts of the drive such as the terminal block 
while the drive’s CHARGE lamp is lit.  A charge will still be present in 
the drive’s internal electrolytic capacitors, and therefore touching these 
areas may result in an electrical shock.  Always turn the drive’s input 
power supply OFF, and wait at least 5 minutes after the CHARGE lamp 
has gone out before connecting communication cables. 

• 

For further drive-specific precaution, safety and installation information, 
please refer to the appropriate documentation supplied with your drive. 

• 

Internal ASD EEPROMs have a limited life span of write cycles.  
Observe all precautions contained in this manual and your ASD 
manual regarding which drive registers safely may and may not be 
repetitively written to.