Toshiba dkt2104-ct Manual De Usuario

You can transfer calls to a idle or busy station, but you cannot transfer calls to a station 
that is in the DND mode.

You cannot transfer calls to a station that is DND. 

1. Press

&1)751

.

You hear dial tone and the Line or

[DN] LED flashes 

at the conference rate.

2. Enter the transfer-to 

[DN], Hunt Group 
[DN], or ACD group 
[DN].

You hear a single tone, unless the call was made with 
Tone First Signaling. Then, you hear ringing tone.

3. Announce the call

The Line LED changes to steady red when the called 
station connects with the transferred call.

If the called station does not answer, you receive a 
recall ring. Your station or

[DN] must be idle to 

receive the recall.

...or press 

/LQH

, 

[DN] + 

 to 

reconnect to the 
transferred call 
before the called 
party answers or busy 
tone is received.

After you hang up, the Line LED begins an on-hold 
flash, or the [DN] LED goes out if you transferred the 
call from a [DN].

4.  Press 

WDON

.

The Line LED changes to steady when the called 
station connects with the transferred call.