Toshiba dynabook v1 v2 satellite p300 Manuales De Servicio

The following describes the procedure for installing the display assembly (See Figure 4-13 to 
4-17). 

1.  Inserting the pole of hinge to the hole of hinge assembly, set the display assembly 

on the base assembly. 

2.  Secure the hinges with the following screws secure the display mask with the 

following screws and stick the mask seal on them. 

•  M2.5×6.5  FLAT BIND screw   

 

x6 

                        (Locktight) 

3.  Connect the LCD harness to the connector on the system board. 

4.  Arrange the wireless antenna cables along the guide (front) and secure them with 

guide.  

5.  Pass the cables to the back of computer through the slot. 

6.  Arrange the wireless LAN antenna along the guide and contact with the connector.  

7.  Install the LAN board and cover ASSY of the system.