Toshiba dynabook v1 v2 satellite p300 Manuales De Servicio

4.  Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the 

counterclockwise with a flat-blade screwdriver. 

5.  Remove the CPU. 

 

The following describes the procedure for installing the CPU (See Figure 4-27 to 4-28). 

1.  Check that the mark of cam is in the unlocking position. 

2.  Attach the CPU to the correct position in the CPU socket. 

3.  Fix the CPU by rotating the cam 120 degrees to the clockwise with a flat-blade 

screwdriver. 

4.  If there is already silicon grease on the CPU, clean it with a cloth. 

Using a special applicator, apply silicon grease so that the CPU chip on the CPU is 
completely covered. 

5.  Please apply 0.1cc silicon grease (

Shinetsu 7762)

 for each repair.

 And apply 

Thermal pad for N-bridge, VGA&V-RAM for each repair