Toshiba dynabook v1 v2 satellite p300 Manuales De Servicio

Descargar
Página de 208
  Replacement Procedures  
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08) 
 4-12 
4.4 HDD 
Removing a MAIN HDD-H9.5mm / HDD-H12.5mm 
The following describes the procedure for removing the main HDD (See Figure 4-3 to 4-4). 
CAUTION:  Take care not to press on the top or bottom of a HDD. Pressure may cause 
data loss or damage to the device. 
1.  Turn the computer upside down. 
2.  Remove the following screws securing a HDD slot cover and remove a HDD slot 
cover
•  M2.5×4.0B   
FLAT BIND screw 
 
x2 
3.  Remove the following screws securing the HDD assembly
•  M2.5×5.0B   
FLAT BIND screw 
 
x2 
4.  Disconnect the HDD assembly from the connector on the system board.