Toshiba dynadock pa3686u-1set Manual De Usuario

17

5.375 x 8.375 ver 2.3

Antennas

Send and receive wireless signals to/from the 
connected computer.

Antenna switch

Slide the switch down

 [ ] 

to enable wireless 

communication between your computer and the 
dynadock™. Slide the switch up

 [

] 

to connect 

your computer to the dynadock™ with a USB cable.

Line out 
(Headphones, 
Speakers)

A standard 3.5 mm mini jack for stereo audio 
output to headphones/headsets/speakers.

0ptical S/PDIF 
digital audio 
output port

Connection point for digital audio equipment (e.g. 
Dolby

®

 Digital Surround Sound receiver and 

speaker system).
Note: Requires an optical S/PDIF cable (not 
provided) and an optical S/PDIF input jack on the 
receiver. 

Network port

Connection point for a 10/100 BASE-TX Ethernet 
cable (not provided).

USB 2.0 ports

Connection points for USB 2.0 and 1.1 devices.
Note 1: Certain USB devices, such as optical disk 
drives and hard disk drives, have high power 
requirements. Due to the power output limitations 
of the USB ports, you may not be able to operate 
more than one such device at a time. 
Note 2: If your USB device came with an AC 
adaptor, be sure to connect the device to a power 
outlet with the AC adaptor. 

DVI-I video port

Connection point for a DVI monitor, or a VGA 
monitor with use of the included DVI-I to VGA 
adaptor.

Mini USB jack

Connection point for the provided USB cable, used 
to connect the dynadock™ to your computer.
Note: When setting up a wireless connection, you 
will need to use the USB cable temporarily to form 
an association between the two devices. For more 
information, see 

.

Security lock slot

Attachment point for an optional security cable 
(not provided) used to deter theft.

DC-IN

Socket for AC adaptor (provided).
Note: The dynadock™ requires an external power 
supply, as it does not draw power from the 
computer’s USB bus.