Toshiba dynadock pa3686u-1set Manual De Usuario

40

If you permanently remove the device, you will not be able to 
connect to that particular device again until the device has been 
re-associated. To re-associate the device, follow the instructions in 
the section 

.

The Options tab of the Wireless USB Manager enables you to 
disable or enable pop-up messages that appear in the System 
tray/Notification Area of your Windows

®

 desktop. For example, a 

pop-up message informs you when an associated wireless USB 
device, such as the dynadock™, has been connected or 
disconnected from your computer. These messages are enabled by 
default.

The Communications tab of the Wireless USB Manager enables 
you to view and change radio settings. The default channel setting 
is Automatic, which enables the host radio to automatically locate 
an available channel for communications. 

It is recommended to leave this setting on Automatic. If you manually 
select a channel that is being used by another dynadock™ in the 
vicinity, the channel bandwidth will be shared by both devices. To 
maximize performance, a separate channel should be used for each 
dynadock™.