Toshiba dynadock pa3686u-1set Manual De Usuario

50

Please note the following: 

❖

Interlaced modes are not supported.

❖

The display modes listed above may not be supported by your 
monitor, or your monitor may offer additional modes not 
supported by the dynadock™. For information on display 
modes supported by your monitor, be sure to check the 
documentation supplied with your monitor. Select a mode that 
both the dynadock™ and the monitor support.

❖

Placing a monitor into an unsupported mode for long periods 
can damage it.

❖

If you are using Mirror mode to clone the primary display’s 
image on an external monitor, the dynadock™ will attempt to 
use the same display mode on the external monitor that you 
selected for the primary display. In some cases, however, this 
may not be the most appropriate mode for the mirrored desktop 
(for example, if the aspect ratio of the displays is not the same). 
In these cases, change the primary display mode to match the 
optimum display mode for the external monitor.

You can playback or record audio either through the dynadock’s 
audio ports or the docked computer’s audio ports. However, you 
cannot use the audio ports on the docked computer and on the 
dynadock™ at the same time.

By default, the audio ports on the dynadock™ are automatically 
enabled each time you dock the computer. When you undock the 
computer, the audio ports on the computer are automatically 
re-enabled.

To change the default settings, you may need to manually adjust the 
audio settings in Windows

®

, as described in this section. For 

example, if you want to use the computer’s audio ports while the 
computer is docked, you will need to change the default settings.

Click the TOSHIBA dynadock Utility icon in the System 
tray/Notification Area of your Windows

®

 desktop.