Toshiba dynadock pa3686u-1set Manual De Usuario

55

Click the Advanced Settings button next to DSP Mode to 
close the Shifter controls and return to the basic controls 
screen.

Adjust other settings, if desired, to suit your sound preferences.

Click OK to close the dialog box.

You can now listen to virtual 7.1-channel sound through your two-
channel headphones or speakers.

Using the S/PDIF Output feature in the included software you can 
directly output the digital sound source from your computer to your 
home theater equipment without loss of sound quality.

To experience true digital sound quality, your digital audio content 
and your external decoder/AV receiver connected to the 
dynadock™ must both support Dolby

®

 Digital or DTS decoding. 

You will also need to enable the S/PDIF output function in the USB 
Multi-Channel Audio Device utility, as described below.

To enable digital S/PDIF output:

Connect your external decoder/AV receiver/speakers to the 
dynadock’s S/PDIF jack. You will need a TOSlink optical 
digital audio cable (purchased separately), to connect the 
dynadock™ to your audio equipment.

1

+/-

Increase/decrease the volume of all virtual speakers

2

Rotate all virtual speakers clockwise

3

Rotate all virtual speakers counterclockwise

4

Manually rotate all virtual speakers

5

Manually change the location of a specific speaker. Click the 
button and then click and drag the speaker to the desired 
location.
This control enables you to enhance an individual channel. For 
example, a low-volume center (for dialog) can be enhanced by 
dragging it closer to the listener.

6

Reset

Return to the default settings