Toshiba lf516 Manual De Usuario

−

62 −

6 F 8 A 0 9 3 4

For example, if the setting range is 10m/s and display digit setting is 1/100, the measured value will
be displayed to the first decimal place.

Setting range＝１０．００００ｍ／ｓ

Likewise, when the setting range 1m/s and display digit setting is 1/100, the measured value will be
displayed to the second decimal place.
The numbers less than the displayed digits will be rounded.

Note: The maximum display digits for flow velocity, flow rate and custom value are 7 digits.

If the measured value exceeds 7 digits, the displayed value remains fixed at the maximum display
value.

● Changing the totalized flow volume direction

You can change the totalized flow volume direction as described below.

The following is an example to change the Display 1 setting from Fixed forward totalized flow (F)
to Bidirectional flow (B).

Switch operation

Display example

Description

DSPL1

Select "DSPL1" from the setting item
selection menu.
The currently set display setting (m

this example) appears.
Then push .

STEP1

DSPL1

The switches at the bottom change.
( are shown.)

At the same time, the cursor appears.

STEP2

DSPL1

Push to move the cursor to the
third unit (totalized flow direction) and then
push to change the direction.

Then push to set the display unit
temporarily.

STEP3(=END)

DSPL1

SET OK?

Pushing shows a message to confirm
whether the setting is OK or not.
If OK, push . If you need to redo the
setting, push .
Pushing cancel the setting operation
and exits the setting screen.

Maximum effective digits

One hundredth of

maximum effective digits

ESC

N O

O K

ESC

O K
N O

ESC