Toshiba MK1032GAX Manual De Usuario
Toshiba Corporation Digital Media Network Company
Page 77 of 159
© 2004, Copyright TOSHIBA Corporation All Rights Reserved
11.8.28 Read Buffer (E4h)
COMMAND CODE
1 1 1 0 0 1 0 0
REGISTER
REGISTER SETTING
NORMAL COMPLETION
DR
drive no.
no change
CY
no
change
HD
no
change
SN
no
change
SC
00H
FT
no
change
This command transfers a specified sector of data ( 512 bytes) from the 128kB buffer in the drive to the host.
When this command is issued, the drive sets BSY, sets up the buffer for read operation, sets DRQ, resets
BSY, and generates an interrupt. The host reads up to 512 bytes of data from the buffer.
When this command is issued, the drive sets BSY, sets up the buffer for read operation, sets DRQ, resets
BSY, and generates an interrupt. The host reads up to 512 bytes of data from the buffer.
11.8.29 Write Buffer (E8h)
COMMAND CODE
1 1 1 0 1 0 0 0
REGISTER
REGISTER SETTING
NORMAL COMPLETION
DR
drive no.
no change
CY
no
change
HD
no
change
SN
no
change
SC
00H
FT
no
change
This command transfers a sector of data from the host to the specified 512 bytes of 128kB buffer of the
drive . When this command is issued, the drive will set up the buffer for write operation, and set DRQ. The
host may then write up to 512 bytes of data to the buffer.
drive . When this command is issued, the drive will set up the buffer for write operation, and set DRQ. The
host may then write up to 512 bytes of data to the buffer.